型號Type |
HX-1000TM/LCD |
物鏡/壓頭切換 Lens/Indenter switch |
自動轉塔切換 With Motorized Turret |
試驗力N Test force |
9.807,4.903, 2.942, 1.961, 0.9807, 0.4903, 0.2452, 0.0981 N 1000, 500, 300, 200, 100, 50, 25, 10 gf |
加荷方式 Loading mode |
程控自動試驗力加載,保持和卸載 Program-controlled application, duration and removal of load |
保荷時間 Duration time |
5 – 60 sec selectable 步長 (In step of ) 5 sec. |
硬度測量范圍 Measuring range |
5 HV – 3000 HV |
測量顯微鏡 Microscope |
物鏡 Objective: 40x; 10X(觀察用 For observation) 目鏡 Eyepiece: 15x 總倍率 Total: 600x; 150X(觀察用 For observation) |
最小檢測單位 Min. detection |
0.025μm |
X-Y測試臺 X-Y stage |
尺寸 Dimensions:100X100mm 最大移動 Travel range:25X25 mm 最小讀數Resolution:1/100mm |
光路切換 Optical path |
測量/CCD攝影切換 Measurement / Photo switch |
測量讀數方式 Measuring mode |
|
|
輸入用測微目鏡測得的對角線長度, 即在LCD上顯示硬度值?纱蛴∮涗。 After taking the D1(D2) from eyepiece micrometer and entering them, the hardness value is displayed on LCD and the data can be printed out. |
|
|
試件最大高度 Max..test height |
85mm |
執行標準 Standard |
執行標準:中華人民共和國國家標準 GB/T 4340.2-1999金屬維氏硬度計試驗 第二部分:硬度計的檢驗 上海市企業標準 Q/NWFQ 01-2002顯微硬度計 |
電源 Power supply |
220 VAC, 50/60 Hz |
尺寸 Dimensions |
外包尺寸 54 x 50 x 64 cm (Packing size) |
毛重 Gross weight |
46 kg |
選購件 Options
|
努氏壓頭 Knoop indenter 數碼相機及適配鏡 Digital camera & adaptor |